Mitsubishi Electric MELSEC iQ-R Series User Manual page 282

No. Name
SD112 Detailed information
2 information
category
SD113 Detailed information
to 2
SD143
APPX
280
Appendix 5 Special Register List
Description Details
Detailed information Detailed information 2 information category code is stored.
2 information
category code
b15
(1) Information category code
(2) Not used (fixed to 0)
The following codes are stored into the information category code.
• 0: N/A
• 2: Drive number and file name
• 3: N/A
• 4: Parameter information
• 5: System configuration information
Detailed information • Detailed information 2 corresponding to the error code (SD0) is stored.
2 • There are three types of information to be stored as shown in (2), (4),
and (5).
• The type of the detailed information 2 can be acquired from SD112.
(The value of the "Detailed information 2 information category code"
which is to be stored to SD112 corresponds to the number (2), (4), and
(5) in the following.)
■(2) Drive number and file name
b15
SD113
SD114
SD115
SD122
The following information is stored in SD113.
• b0: Drive No.
• b1: File name
■(4) Parameter information
b15
SD113
SD114
SD115
SD116
SD117
SD118
SD119
SD129
The following information is stored in SD113.
• b0: Parameter type
• b1: Parameter storage destination
• b2: I/O No.
• b3: Parameter No.
• b4: Network No.
• b5: Station No.
• b6: System information
The parameter type is stored in SD114 (b0 to b7).
• 1: System parameter
• 2: CPU parameter
• 3: Module parameter
• 4: Module extended parameter
• 5: Memory card parameter
The parameter storage destination is stored in SD114 (b8 to b15).
• 2: SD memory card
• 4: Data memory
The I/O No. is stored in SD115. (0xFFFFH if an I/O No. is not assigned.)
The network No. (0 to 120) is stored in SD117. (0 for a master station)
b8b7
(2) (1)
With or without specification
Drive No.
File name
(first eight characters of Unicode string)
With or without specification
Parameter storage Parameter
destination type
I/O No.
Parameter No.
Network No.
Station No.
System information
Set by (when to set)
S (error occurrence)
b0
S (error occurrence)
b0
1st character
8th character
b0