Mitsubishi Electric MELSEC iQ-R Series User Manual page 160

■Function list
The following table shows functions to be used in a user program.
Function name
mdBdDevRstEx
mdBdDevSetEx
mdBdRandREx
mdBdRandWEx
mdBdReceiveEx
mdBdSendEx
mdDevRstEx
mdDevSetEx
mdRandREx
mdRandWEx
mdReceiveEx
mdSendEx
The access timing with a user program is not synchronized with the timing of link scan and link refresh. Create
an interlock program as necessary.
16 NETWORK MODULE ACCESS FUNCTION
158
16.1 Cyclic Transmission
Purpose
To reset (turn OFF) bit devices on the own station
To set (turn ON) bit devices on the own station
To read data from devices on the own station randomly
To write data to devices on the own station randomly
To read data from devices on the own station in a batch
To write data to devices on the own station in a batch
To reset (turn OFF) bit devices
To set (turn ON) bit devices
To read data from devices randomly
To write data to devices randomly
To read data from devices in a batch
To write data to devices in a batch