Setting method
1.
From "Module List," select a target device to be connected, and then drag and drop (3) it to the device list (1) or device
configuration (2).
(1)
(2)
2.
Set each item.
3.
Click the [Close with Reflecting the Setting] button.
Setting a target device from connection No.1 is required in the external device configuration.
If using a specific connection number, set "MELSOFT connected device" to the target device with the unused
connection number.
• When using only the connection No.5
13 MELSOFT CONNECTION FUNCTION
142
13.1 Connection Method
(3)