Mitsubishi Electric MELSEC iQ-R Series User Manual page 65

Pre-installed applications
The following applications are pre-installed on Windows in this product.
■MELSEC iQ-R series compatible MELSECWinCPU module driver software package
• MELSEC data link functions
MELSEC data link functions are an integrated communication library which is independent of communication protocols.
A program for accessing devices of this product and accessing the device memory of another programmable controller CPU
can be created.
• C Controller module dedicated functions
C Controller module dedicated functions are a dedicated function library to control this product.
In this product, the functions are used for clearing errors, acquiring module configuration information, etc.
• Drivers and services for a MELSECWinCPU module
Windows services and drivers for using hardware and MELSEC functions from Windows in this product
• Firmware for a MELSECWinCPU module
Firmware where the MELSEC functions, which are for controlling this product as a MELSEC iQ-R series CPU module, run.
■MELSOFT applications
• CW Configurator (SW1DND-RCCPU-E) (CW Configurator Operating Manual)
The English version is pre-installed. To update CW Configurator, use a product DVD-ROM or an installer of the updated
version for English.
• Edgecross Basic Software (SW1DNN-ECBS-M)
• SLMP Data Collector (SW1DND-DCSLMP-M) (SLMP Data Collector User's Manual)
*1 Running multiple software applications may increase the load (such as a high CPU usage rate) on the product and may affect its
behavior. Refer to the manual of software to be used to prevent excessive load on the product.
The installer of the updated version of CW Configurator can be downloaded from the Mitsubishi Electric FA
website.
www.MitsubishiElectric.com/fa
Precautions
To install other MELSOFT products, install the English version of the products.
To install products in a language other than English, uninstall all the pre-installed applications shown below:
• CW Configurator
• Motion Control Setting
• MR Configurator2
• Simple Motion Module Setting
After uninstalling the applications, install them in a language to be used.
*1
*1
6 SYSTEM CONFIGURATION
6.2 Software Configuration
6
63