Mitsubishi Electric MELSEC iQ-R Series User Manual page 95

Advanced
The sub menus for a system and devices are displayed.
■System Configuration
Settings for a system are displayed.
Item
NumLock
Setup Pre-Delay
Above 4GB MMIO
■Processor Configuration
Settings for a processor are displayed.
Item
Active Processor Cores
Intel(R) VT
Processor Power Management
• Processor Power Management
Item
Intel(R) SpeedStep(tm)
Boot Performance Mode
Turbo Mode
Description
Set the NumLock status of a keyboard.
• On: NumLock is turned ON (the numeric keypad works as number keys). (Default)
• Off: NumLock is turned OFF (the numeric keypad works as arrow keys).
Set the reception time for a startup key for the BIOS setup.
• 0 to 10: The reception time can be set within the range of 0 to 10 seconds. (Default: 2)
Set the memory space for PCI Express.
• Enabled: The PCI Express memory is set in 64-bit space.
• Disabled: The PCI Express memory is not set in 64-bit space. (Default)
Description
Set the number of cores in a processor.
• All: All cores are used. (Default)
• 1: One core is used.
Set whether to enable Intel Virtualization Technology.
• Disabled: Intel Virtualization Technology is disabled.
• Enabled: Intel Virtualization Technology is enabled. (Default)
The sub menus for the processor power management are displayed.
Description
Set whether to enable Enhanced Intel SpeedStep(R) Technology.
• Disabled: Enhanced Intel SpeedStep(R) Technology is disabled.
• Enabled: Enhanced Intel SpeedStep(R) Technology is enabled. (Default)
Set the operating frequency of a processor on boot.
• Max Performance: A processor is set to operate at the rated frequency on boot. (Default)
• Max Battery: A processor is set to operate at the minimum frequency on boot.
Set whether to enable Turbo Boost Technology.
• Disabled: Turbo Boost Technology is disabled.
• Enabled: Turbo Boost Technology is enabled. (Default)
9 MAINTENANCE AND INSPECTION
9.3 BIOS Setup
9
93