Chapter 21 Individual Reset Function - Mitsubishi Electric MELSEC iQ-R Series User Manual

21
INDIVIDUAL RESET FUNCTION
This function resets (restarts) Windows and the bus control in this product individually.
• Restarting Windows only (Windows forced restart)
• Resetting the bus control only (bus reset)
When restarting Windows for reasons such as to add applications and recover from an error, this function can
restart only Windows without any effect on the bus control. In addition, this function can reset the bus control
and apply parameters without restarting Windows.
Extent of effect from an individual reset
The following table shows the extent of effect on targets by performing an individual reset.
Target
Windows in this product
User applications which run on Windows
Parameters of this product and a module
which is controlled by this product
READY LED
OS LED
ERROR LED
Y STOP LED
Devices and buffer memory
Other modules on the same base unit
*1 If an error is not cleared, the ERROR LED will turn ON or flash again.
Individual reset
Windows forced restart
Restarted
Ended
Not affected
Not affected
Flashing or turns OFF according to the Windows status.
Not affected
Not affected
The output (Y) set for "Y Output Setting while Windows
is Restarting" turns ON.
Not affected
Bus reset
Not affected
Not affected
The latest written parameters are applied.
Flashing slowly in green during the initial processing of
the bus control
Not affected
*1
OFF
ON
Zero clear
Reset
21 INDIVIDUAL RESET FUNCTION
21
189