7.5
Measure to Prevent a Cable from Falling Out
This section shows a measure to prevent a cable from falling out. Take the measure when wiring a USB cable or HDMI cable.
1.
Pass a cable tie through the cable tie mounting structure (1) that is on the bottom of this product.
It is recommended to use a cable tie with the width of 6 to 8 mm and thickness of 1 mm or less.
2.
Pass a cable (3) through the cable tie (2).
3.
Tighten the cable tie.
7 WIRING
78
7.5 Measure to Prevent a Cable from Falling Out
(1)
(2)
(3)