Mitsubishi Electric MELSEC iQ-R Series User Manual page 25

No. Name
*8
(19) Primary CFast card slot
*9
(20) Secondary CFast card slot
(21) Service connector cover
(22) Switch cover
*10
(23) CFast cover
(24) Product information marking
*1 Flashing occurs at the following intervals:
 Flashing: 200 ms
 Slow flashing: 1 sec
*2 For details on each operation mode, refer to the following:
Page 26 Operation mode
*3 The LED does not turn OFF even when a major error occurs because the mode display takes priority.
*4 In the normal mode, the LED is OFF or flashes depending on parameters of the Windows forced restart at error function.
*5 The LED does not turn ON when a recovery media is used in the USB boot mode.
*6 Operate the switch by a fingertip. Using tools such as a screwdriver may cause damage to the switch.
*7 After the reset, put the switch back to the center position. The reset state is not released until the switch is put back to the center
position.
*8 Only the CFast card provided with this product can be used.
*9 Only the CFast cards that are described as optional products and applicable products for this product can be used.
*10 Use a spring clamp terminal block tool (KD-5339) to open and close the CFast cover.
Description
A slot for a CFast card for the operating system startup
A slot for a CFast card for extension
A protective cover for the service connector
A protective cover for the switches.
It also protects the battery slot and SD memory card slot.
A protective cover for the CFast card slots
Displays the product information (16 digits) of a module.
1
1 PART NAMES
23