Chapter 13 Melsoft Connection Function - Mitsubishi Electric MELSEC iQ-R Series User Manual

13
MELSOFT CONNECTION FUNCTION
This function connects MELSOFT products on a network and this product by using the Ethernet port of this product.
CW Configurator which runs on this product is connected by using the MELSOFT connection function.
Precautions
■Windows operating status and function operation
The MELSOFT connection function does not run when Windows installed on this product is not running (such as during restart
and shutdown).
■Operation when resetting a bus
When resetting a bus, all of the MELSOFT products connected to this product will be disconnected.
After the READY LED turns ON, reconnect them after a while.
■Ethernet port to be used
Do not use the Ethernet port that is used for the MELSEC connection function for other applications.
Port number Purpose
Dec Hex
5006 138EH MELSOFT transmission port (UDP/IP)
5007 138FH MELSOFT transmission port (TCP/IP)
5008 1390H MELSOFT direct connection port
5100 13ECH For system
50300 C47CH For system
13 MELSOFT CONNECTION FUNCTION
13
131