Chapter 22 Windows Shutdown Function - Mitsubishi Electric MELSEC iQ-R Series User Manual

22
Windows SHUTDOWN FUNCTION
This function shuts down Windows in this product by using a switch or input of an I/O module.
The shutdown processing of this function is the same as the one when shutting down Windows from Windows Start.
Execution of shutdown
Windows can be shut down by either of the following methods.
■Switch operation
Hold the FUNCTION/SHUTDOWN switch on the SHUTDOWN position (for 1.0 second or longer).
■Using an I/O module (input (X))
Turn ON an input (X) device specified in the parameter for one second or longer by using an input module.
*1 The status of the input device is detected at a refresh cycle. However, the status is not detected if the input device is turned from ON to
OFF at an interval shorter than the refresh cycle. Consider the refresh cycle when turning the input from ON to OFF. (Page 181
FIXED CYCLE PROCESSING FUNCTION)
An input (X) can be set in the following parameter:
[CPU Parameter]  [Operation Related Setting]  [Windows Setting]
Window
Displayed items
Item
X Input Setting to Shut Down
Windows
*1 The device set in "X Input Setting to Forced Restart Windows" cannot be set.
In "X Input Setting to Shut Down Windows," set an input of a module controlled by this product. To set an input
of a module controlled by another CPU module, configure the settings so that the input status of other groups
are imported. (Page 150 Out-of-Group I/O Fetch)
Description
Set the X device for requesting the Windows shutdown.
Windows will be shut down by turning ON the X device specified in this
parameter for one second or longer.
*1
Setting range Default
*1
X0 to FFFH Blank
22 Windows SHUTDOWN FUNCTION
22
193