Creating And Registering A User Program - Mitsubishi Electric MELSEC iQ-R Series User Manual

Creating and registering a user program

The following shows the procedure for creating and registering a user program.
1.
Copy header files and library files that are stored in this product to the personal computer in a development environment.
The header files and library files are stored in the following locations:
Drive name Folder name
C: WinCPU
Required header files and library files differ depending on the development environment and language.
2.
Create a user program with dedicated functions.
3.
Copy the user program to this product and check the operation.
The operation can be checked by performing remote debugging from the development personal computer via Ethernet.
4.
Store the user program (.exe) in the startup folder of Windows in this product.
By registering the user program in the startup folder, the program runs when turning the power of this product ON (when
starting Windows).
Therefore, store a user program in the startup folder only to run the program when the power is turned ON.
4 PROCEDURES BEFORE OPERATION
56
4.7 Creating and Registering a User Program
Description
INCLUDE Folder to store header files
LIB Folder to store library files