Huawei NetCol8000-E220 User Manual page 88

NetCol8000-E220 Modular Indirect Evaporative
Cooling System
User Manual
Menu
Issue 06 (2020-08-19)
Parameter
Smart
cooling
product
address
Enable
Teamwork
CAN resistor
Teamwork
function
Networking
mode
Number of
smart
cooling
products in
this group
Number of
running
smart
cooling
products in
this group
Rotation
function
Rotation
period
Copyright © Huawei Technologies Co., Ltd.
4 Power-on and Commissioning
Setting Guide
Set the assigned unit
address.
● Set this parameter to
No for non-teamwork
scenarios.
● For teamwork
scenarios, set this
parameter to Yes for
the first and last
smart cooling
products in a
teamwork group, and
set it to No for other
smart cooling
products.
Set this parameter based
on the onsite device heat
distribution.
Networked over CAN or
MAC_CAN. CAN
network indicates
teamwork control over a
CAN bus, MAC_CAN
network teamwork
control over an FE port.
Total number of the
smart cooling products in
this group.
The host allocates
running units by smart
cooling product unit
address in ascending
order, which is from 1 to
32. The rest will become
the standby ones.
This function is
recommended when the
heat is even.
7 by default
Default Value
NA
No
Disable
CAN network
3
2
Disable
7 day (s)
79