Huawei NetCol8000-E220 User Manual page 108

NetCol8000-E220 Modular Indirect Evaporative
Cooling System
User Manual
Paramete
r
Networkin
g mode
Number
of smart
cooling
products
in this
group
Number
of running
smart
cooling
products
in this
group
Rotation
function
Rotation
period
Rotation
time
Issue 06 (2020-08-19)
Description
Networking mode for
the teamwork. The
networking mode set on
the screen must be
consistent with the
actual networking mode.
Otherwise, the
teamwork control
function will be
unavailable. If the
networking mode
changes, select the
corresponding
networking mode on the
screen.
Number of the smart
cooling products in this
group (1 to 32 can be
set).
Number of active units
in a group. The value
ranges from 1 to
Number of smart
cooling products in this
group.
Disable or enable the
active and standby
smart cooling products
to change identity after
a certain time,
maximizing their service
life.
Rotation days (1–30).
24 hours in a day (0–
23).
Copyright © Huawei Technologies Co., Ltd.
4 Power-on and Commissioning
Configuration
Principle
Networked over CAN
or MAC_CAN. CAN
network indicates
teamwork control over
a CAN bus, MAC_CAN
network teamwork
control over an FE port.
Total number of the
smart cooling products
in this group.
The host allocates
running units by smart
cooling product unit
address in ascending
order, which is from 1
to 32. The rest will
become the standby
ones.
This function is
recommended when
the heat is even.
7 by default
0 by default
Default
Value
CAN network
3
2
Disable
7 day (s)
0
99