Huawei NetCol8000-E220 User Manual page 273

NetCol8000-E220 Modular Indirect Evaporative
Cooling System
User Manual
Menu
Settings >
Quick
Settings >
Comm
Setting
Maint >
Performance
Maint
Issue 06 (2020-08-19)
Name
Temperature
setpoint
Humidity
setpoint
Cold aisle sensor
Hot aisle sensor
Modbus Comm
address
Indoor fan total
runtime
Return air filter
total runtime
Outdoor intake
air filter total
running time
Compressor total
runtime
EEV total
runtime
Copyright © Huawei Technologies Co., Ltd.
Description
After the Temperature and
humidity control type and
the temperature value
under this type are set, the
device conducts cooling or
heating based on the
settings.
After the Temperature and
humidity control type and
the humidity value under
this type are set, the device
conducts humidifying or
dehumidifying based on
the settings.
The sensors in cold aisles
can be set to Enable or
Disable.
The sensors in hot aisles
can be set to Enable or
Disable.
Set the communication
address of the smart
cooling product as
planned. The EMS
communicates with the
smart cooling product
through this address, and
the communication
addresses of two smart
cooling products
connecting to the same
EMS must be unique.
Total runtime for each
component.
C Parameter Description
Default Value
22.0 ºC
50.0 %RH
Disable
Disable
1
0 h
0 h
0 h
0 h
0 h
264