Huawei NetCol8000-E220 User Manual page 259

NetCol8000-E220 Modular Indirect Evaporative
Cooling System
User Manual
Menu
Settings >
Comm
Settings >
WIFI
Settings
Settings >
Comm
Settings >
Modbus
Settings
Issue 06 (2020-08-19)
Name
IP address
Subnet mask
Gateway
WiFi SSID
WiFi password
Enable WiFi
Baud rate
Communication
address
Copyright © Huawei Technologies Co., Ltd.
Description
Specifies the IP address for
the smart cooling product.
Specifies the subnet mask
for the smart cooling
product.
Specifies the gateway for
the smart cooling product.
Set WiFi SSID based on the
actual configuration; WiFi
SSID is the name used for
the WiFi hotspot over
which a mobile phone can
connect to the smart
cooling product.
Enter the WiFi password
when you use a mobile
phone to connect to the
WiFi. When you enable the
WiFi function for the first
time, you need to set a
password.
Enable the WiFi function.
Set the baud rate as
required. The value should
be consistent with that set
on the EMS.
Set the communication
address of the smart
cooling product as
planned. The EMS
communicates with the
smart cooling product
through this address, and
the communication
addresses of two smart
cooling products
connecting to the same
EMS must be unique.
C Parameter Description
Default Value
192.168.000.01
0
255.255.255.00
0
192.168.000.00
1
NETCOL_6650b
0
-
Disable
9600
1
250