Huawei NetCol8000-E220 User Manual page 79

NetCol8000-E220 Modular Indirect Evaporative
Cooling System
User Manual
Figure 3-48 Removing the transport fasteners from the compressor
Step 2 Remove the transport fasteners.
Step 3 Tighten the bolts on the compressor again to a torque of 12 N.m.
Step 4 Take out the two desiccant bags from No. 2nd maintenance door.
Step 5 Open the No. 1st maintenance door, and take out the one desiccant bags from No.
1st maintenance door.
Step 6 Remove the air filter from the air vent on the outdoor side and take out two
desiccant bags from the device.
Figure 3-49 Position of the desiccants
Step 7 Remove the elastic cord from the two floats.
Issue 06 (2020-08-19)
NO TE
● Do not remove the bolts directly.
● Put away the removed transport fasteners so that you can reinstall them if the indoor
unit is to be transported again in the container scenario.
Copyright © Huawei Technologies Co., Ltd.
3 Installation Guide
70