NetCol8000-E220 Modular Indirect Evaporative
Cooling System
User Manual
Figure 3-17 Removing the air vent baffle
Step 3 Push the stitched air channel into the bottom of the device.
Step 4 Remove the canvas sheet metal from the end of the air duct using diagonal pliers.
Figure 3-18 Removing the duct fasteners
Step 5 Secure the canvas sheet metal and canvas to the equipment using M6 screws.
Ensure that there is no air leakage on the contact between the equipment and the
air duct. Otherwise, condensate water may occur.
Issue 06 (2020-08-19)
NO TICE
Copyright © Huawei Technologies Co., Ltd.
3 Installation Guide
45