NetCol8000-E220 Modular Indirect Evaporative
Cooling System
User Manual
Menu
Maint >
Sensor
Calibration
Issue 06 (2020-08-19)
Name
Spray pump total
runtime
Spray system
total runtime
Exhaust fan total
runtime
Supply air temp
calibration value
Return air
temperature
calibration value
Return air
humidity
calibration value
Outdoor intake
air temperature
calibration value
Outdoor intake
air humi
calibration value
Exhaust air
temperature
calibration value
Compressor
discharge
pressure
calibration value
Compressor
suction pressure
calibration value
Compressor
discharge
temperature
calibration value
Compressor
suction
temperature
calibration value
Copyright © Huawei Technologies Co., Ltd.
Description
Specifies the adjustment
value of each sensor when
the detected temperature
or humidity varies from the
practical value. For
example, if the detected
return air temperature is
1°C lower than the value
detected by other devices,
set the calibration value to
1°C.
C Parameter Description
Default Value
0 h
0 h
0 h
0.0 ºC
0.0 ºC
0.0 %RH
0.0 ºC
0.0 %RH
0.0 ºC
0.00 MPa
0.00 MPa
0.0 ºC
0.0 ºC
265