ABB ACSM1 Firmware Manual page 217

Code Fault
(fieldbus code)
0302 APPL DIR CREATION
(0x6100)
0303 FPGA CONFIG DIR
(0x6100)
0304 PU RATING ID
(0x5483)
0305 RATING DATABASE
(0x6100)
0306 LICENSING
(0x6100)
0307 DEFAULT FILE
(0x6100)
0308 APPL FILE PAR CONF
(0x6300)
0309 APPL LOADING
(0x6300)
0310 USERSET LOAD
(0xFF69)
0311 USERSET SAVE
(0xFF69)
0312 UFF OVERSIZE
(0x6300)
0313 UFF EOF
(0x6300)
Cause
Drive internal fault
Note: This fault cannot be
reset.
Drive internal fault
Note: This fault cannot be
reset.
Drive internal fault
Note: This fault cannot be
reset.
Drive internal fault
Note: This fault cannot be
reset.
Drive internal fault
Note: This fault cannot be
reset.
Drive internal fault
Note: This fault cannot be
reset.
Corrupted application file
Note: This fault cannot be
reset.
Corrupted application file
Note: This fault cannot be
reset.
Loading of user set is not
successfully completed
because:
- requested user set does not
exist
- user set is not compatible with
drive program
- drive has been switched off
during loading.
User set is not saved because
of memory corruption.
UFF file is too big.
UFF file structure failure
What to do
Contact your local ABB representative.
Contact your local ABB representative.
Contact your local ABB representative.
Contact your local ABB representative.
Contact your local ABB representative.
Contact your local ABB representative.
Reload application.
If fault is still active, contact your local ABB
representative.
Reload application.
If fault is still active, contact your local ABB
representative.
Reload.
Check the setting of parameter
UNIT SUPPLY.
If the fault still occurs, contact your local ABB
representative.
Contact your local ABB representative.
Delete faulty file or contact your local ABB
representative.
217
95.01 CTRL
Fault tracing