Group 99 Start-Up Data - ABB ACSM1 Firmware Manual

178
Group 99 START-UP DATA
Start-up settings such as language, motor data and motor control mode.
The nominal motor values must be set before the drive is started; for detailed
instructions, see chapter
With DTC motor control mode, parameters
accuracy is achieved by also setting parameters
With scalar control, parameters
99
99 START-UP DATA
99.01 LANGUAGE
Selects the language.
(0809h) ENGLISH
(0407h) DEUTSCH
(0410h) ITALIANO
(040Ah) ESPAÑOL
(041Dh) SVENSKA
(041Fh) TÜRKÇE
99.04 MOTOR TYPE
Selects the motor type.
Note: This parameter cannot be changed while the drive is running.
(0) AM
(1) PMSM
Parameters and firmware blocks
Start-up on page 15.
99.06...99.10
99.06...99.09
FW block: None
English.
German.
Italian.
Spanish.
Swedish.
Turkish.
FW block: None
Asynchronous motor. Three phase AC voltage supplied induction
motor with squirrel cage rotor.
Permanent magnet motor. Three phase AC voltage supplied
synchronous motor with permanent magnet rotor and sinusoidal
BackEMF voltage.
must be set; better control
99.11 and 99.12.
must be set.