Chapter 4 Settings And Procedure To Operation 4 - 1 To; Handling Precautions; Settings And Procedure To Operation - Mitsubishi Electric Melsec Q Series User Manual

4

SETTINGS AND PROCEDURE TO OPERATION

CHAPTER 4 SETTINGS AND PROCEDURE TO OPERATION
This chapter explains the settings and procedure to operate the MES interface module in a
system.

4.1 Handling Precautions

This section explains the precautions for handling the MES interface module itself.
(1) Do not drop or apply severe shock to the module case since it is made of
(2) Before touching the module, always touch grounded metal, etc. to discharge
(3) Tighten the module fixing screws within the following range.
4
- 1 4.1 Handling Precautions
(1) Before use, make sure to read SAFETY PRECAUTIONS at the beginning of
this manual.
(2) The mounting and installation environment of the MES interface module are
the same as those of a programmable controller CPU.
For details, refer to the following manual.
QCPU User's Manual (Hardware Design, Maintenance and Inspection)
resin.
static electricity from human body, etc.
Not doing so can cause the module to fail or malfunction.
Module fixing screw (usually not required) (M3 screw)
*1 The module can be easily fixed onto the base unit using the hook at the top of the module.
However, it is recommended to secure the module with the module fixing screw if the module is
subject to significant vibration.
Table 4.1 Tightening torque
Screw
*1
Tightening torque range
0.36 to 0.48 N·m