Operations Using The Edit Items Tree - Mitsubishi Electric Melsec Q Series User Manual

7
MES INTERFACE FUNCTION CONFIGURATION TOOL

7.3.4 Operations using the Edit items tree

The Edit items tree shows overall project settings in a tree.
This section explains the operations using the Edit items tree.
(1) Selecting an item
1
2
(2) Adding an item
1
2
Project root
When double-clicking the project root or each setting type, some items are
displayed.
Selecting one of the items displays the corresponding edit screen on the detailed
setting edit screen area.
Selecting an item or a setting type to be added and performing either of the
following will add the item.
• Click (Add item).
• Select [Edit] [Add item] from the menu.
When the item is added properly, it is automatically selected and the edit screen
is switched to the one for the added item.
Since the number of items that can be added is limited depending on the setting
type, refer to the relevant section of each item.
Figure 7.11 Edit items tree
7.3 Screen Structure
7.3.4 Operations using the Edit items tree
Item
Setting type
7
- 7
1
2
3
4
5
6
7
8