Mitsubishi Electric Melsec Q Series User Manual page 115

4
SETTINGS AND PROCEDURE TO OPERATION
2
EJECT button
Orientation of a
CompactFlash
card
CompactFlash card slot
3
4
Install the CompactFlash card.
When installing the CompactFlash card into the MES interface module, pay
attention to the orientation of the card.
Push the CompactFlash card securely into the slot until it is flush with the EJECT
button.
LED cover
PULL
CF CARD
10BASE-T/
100BASE-TX
100
M
SD/
RD
QJ71MES96N
Figure 4.15 Installation of a CompactFlash card
Lower the LED cover on the front of the MES interface module until it clicks.
When a CompactFlash card is installed, the CompactFlash card slot cover cannot
be attached to the MES interface module.
Save the removed CompactFlash card slot cover carefully.
4.7.2 Installation/removing the CompactFlash card
Tab direction
Insert in
this direction.
CompactFlash card
4.7 CompactFlash Card
1
2
3
4
5
6
7
8
4
- 18