Setting Items For Job Cancellation - Mitsubishi Electric Melsec Q Series User Manual

Programmable contoller mes interface module
Hide thumbs Also See for Melsec Q Series:
Table of Contents

Advertisement

7
MES INTERFACE FUNCTION CONFIGURATION TOOL

7.10.5 Setting items for job cancellation

Set whether to enable or disable notification of errors (job cancellation) that occur during
job execution.
Job execution is canceled when access to the database fails or when type mismatch is
found.
(1) Notify errors (job cancellation) that occur during job execution
7
- 80
7.10 Job Setting
7.10.5 Setting items for job cancellation
• Section 6.1.11 (2) When an error occurs in job execution
• Section 7.15 (5) Type mismatch
Figure 7.64 Setting example of [Notify errors (job cancellation) that occur during job execution]
(a) Set whether to enable or disable notification of errors (job cancellation) that occur
during job execution.
When [Notify errors (job cancellation) that occur during job execution] box is
checked, if job execution is canceled, a value is assigned to the specified tag
component.
(b) Set a tag component to which the value is assigned when this is selected.
1) Tag, Component
Select a tag component to which a value is assigned.
Note that the following tags are not selectable.
• Tags for which [Prohibit data writing] is enabled
• Tags for which [Array setting] is set
2) Substitute value
Directly enter a substitute value.
The following lists values that can be entered as a substitute value.
Table 7.59 Values that can be entered as a substitute value
Data type of tag
component
Bit type
Single-precision type
Double-precision type
Floating-point type
16-bit BCD type
32-bit BCD type
Character string
Values that can be entered as a substitute value
ON/OFF is selectable.
Up to 16 characters
• Signed decimal notation (Example: -521.98)
• Signed exponential notation (Example: -5.2198E03)
Unsigned 16-bit BCD notation 0 to 9999 (Example: 1234)
Unsigned 32-bit BCD notation 0 to 99999999 (Example: 12345678)
Up to 32 characters
For characters that can be used for character strings, refer to the
following:
Appendix 2.3 Characters available for character string constants,
etc.

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

Qj71mes96Qj71mes96nSw1dnc-mesif-e

Table of Contents