Setting Items In Access Target Cpu Setting - Mitsubishi Electric Melsec Q Series User Manual

7
MES INTERFACE FUNCTION CONFIGURATION TOOL

7.7.1 Setting items in Access target CPU setting

Up to 64 items can be set in [Access target CPU settings] within one project.
By default, a control CPU is set as the first item with "ControlCPU" displayed for CPU
name.
Deletion or setting modification of the first item is not allowed.
Only the CPU name can be modified.
(1) CPU name (Up to 16 characters)
7
- 34 7.7 Access Target CPU Setting
7.7.1 Setting items in Access target CPU setting
Figure 7.28 [Access target CPU settings]
Table 7.35 Setting items in [Access target CPU settings]
Item
CPU name
PLC series
Multiple CPU specification
Other station specification
Network communication
route, Co-existence network
communication route
Set the access target CPU name.
The set CPU name is used in [Device tag settings].
For characters that can be used for CPU names, refer to the following:
Appendix 2.2 Characters that can be used for item names, component names,
variable names, etc. in the product
Set the access target CPU name. (Up to 16 characters)
Select the PLC series of the access target CPU.
Select a CPU No. when the access target CPU is used in the multiple CPU
system.
Select whether or not to specify any other station.
Set the network type, network No, head I/O address, and station No. used
for access when any other station is specified.
Description