Mitsubishi Electric Melsec Q Series User Manual page 258

7
MES INTERFACE FUNCTION CONFIGURATION TOOL
7
- 100 7.11 Job Setting - Actions
7.11.2 Setting items in Communication action (Select/Update/Insert/MultiSelect/Delete)
(d) When [MultiSelect] is selected for [Action type]
[MultiSelect] substitutes field values of the records, whose conditions are met, for
substitute values (tag component values).
Conditions for the records to be selected are set in [Select/Update/Delete
conditions].
(6) Select/Update/Delete conditions in this section
Conditions for sorting the selected records are set in [Select sort settings].
(7) Select sort settings in this section
1) Field name (Up to 32 characters)
Set a field name for the field values to be multi-selected.
For characters that can be used for field names, refer to the following.
Appendix 2.4 Characters available for field names, table names, stored
procedure names,etc.
For browsing the field names in the database, refer to the following:
(8) Browse field name in this section
2) Tag
Select a target tag.
Only the tags with [Array setting] can be selected.
3) Component
Select a target component.
When [MultiSelect] is used in a job, the total of [Tag component data length in job]
must be 45000 words or less.
[Tag component data length in job] represents a total length of the tag component
data set for the following:
• [DB-tag link settings] in [Communication action]
• [Select/Update/Delete conditions] in [Communication action]
• [Operation action]
Even if the same tag component is set more than once in the same job, each
setting is handled separately.
(The number of settings can be confirmed on the status bar of [Job setting], or in
the [Communication action] or [Operation action] dialog box.)