Mitsubishi Electric Melsec Q Series User Manual page 421

APPENDICES
(2) Label
Label
Set [Access target CPU settings] items No. 1. (Setting required)
CPU1
Only [CPUNAME] can be set. (Other setting items are disabled.)
1
Set [Access target CPU settings] items No. 2 to 64.
CPU2 to CPU64
Enter only the labels desired to be set. (Unnecessary to enter labels not to be set.)
(3) Setting item
Item
2
CPUNAME
CPU name
3
SERIES PLC series
Multiple CPU
4
MULTI CPU
specification
Other station
5
OTHER STATION
specification
6
NET1 Network
7
NETNO1 Network No.
8
IO1 I/O Address
Table App.25 Label
Table App.26 Setting item
Description
*1 *2
QCPU (Q mode)/RCPU
QCPU (A mode)
LCPU
QnACPU
ACPU
No specification
When [QCPU] is CPU No. 1
selected with CPU No. 2
CPU No. 3
SERIES
CPU No. 4
When other than the above is selected
with SERIES
*3
No specification
Other station (Single network)
Other station (Different network)
CC IE Control
When [SINGLE]
NET/10(H)
or [DIFFERENT]
CC-Link
is selected with
Ethernet
OTHER STATION
C24
*4
CC IE Field
When [NO] is selected with OTHER
STATION
When [SINGLE] or [DIFFERENT] is
selected for OTHER STATION and
[NET10], [ETHERNET], or [CCIEFIELD]
is selected for NET1
When other than the above is selected
When [SINGLE] or [DIFFERENT] is
selected with OTHER STATION and
[CCLINK] or [C24] is selected with NET1
When other than the above is selected
Appendix 3 Setting Information File Format (CSV File Format)
Description
Setting value
Up to 16 characters
(Blank)
[DIFFERENT]
[ETHERNET]
[CCIEFIELD]
(Blank)
1 to 239
(Blank)
0h to FE0h (Hexadecimal)
(Blank)
Appendix 3.7 CPU.CSV
*5
[QCPU]
[QCPUA]
[LCPU]
[QNACPU]
[ACPU]
[NO]
[1]
[2]
[3]
[4]
[NO]
[SINGLE]
[NET10]
[CCLINK]
[C24]
(To the next page)
App
- 25
9
10