Mitsubishi Electric Melsec Q Series User Manual page 364

10
TROUBLESHOOTING
Error code
FFF5h
FFF8h
FFFAh
FFFBh
FFFCh
FFFDh
FFFEh
FFFFh
10
- 23 10.2 Error Code List
10.2.1 Error codes for the MES interface module
Table 10.3 Error codes for the MES interface module
Error name
System error —
The device size exceeded the device
Size error
range.
CPU error An invalid station was specified.
Device type error The device type is incorrect.
Device No. error The device number is incorrect.
System error —
Description
• Please consult your local Mitsubishi
• Correct the device number entered
• Check the settings of the network
• Check the station number setting in
• Correct the device type entered in
• Correct the device number entered
• Please consult your local Mitsubishi
(From the previous page)
Action
representative.
in [Device tag settings].
module on the access route.
[Access target CPU settings].
[Device tag settings].
in [Device tag settings].
representative.