Mitsubishi Electric Melsec Q Series User Manual page 355

10
TROUBLESHOOTING
Error code
0B2Ah
to
0B2Dh
0B2Eh
0B2Fh
0B30h
0B31h
0B32h
0B33h
0B34h
0B35h
to
0B3Ah
0B3Bh
0B3Ch
0B3Dh
0B3Eh
0B3Fh
0B40h
0B41h
0B42h
0B43h
0B44h
Table 10.3 Error codes for the MES interface module
Error name
System error —
Data stored in the DB buffer are
DB buffer content error invalid. (The CompactFlash card may
be corrupted.)
A part of invalid data in the DB buffer
has been corrected.
Partial correction of DB
(A part of the DB buffered data in the
buffer content
CompactFlash card may have been
corrupted.)
System error —
Failed to clear the DB buffer. (The
DB buffer clear error CompactFlash card may be
corrupted.)
The DB buffer file is invalid. (The
DB buffer file error CompactFlash card may be
corrupted.)
Data stored in the DB buffer are
DB buffer content error invalid. (The CompactFlash card may
be corrupted.)
System error —
Because the DB buffer became full,
DB buffer full error the data could not be stored in the DB
buffer.
System error —
Failed in file operation during DB
DB buffering error
buffering operation.
System error —
Data in the DB buffer could not be
DB buffer read error
read normally.
DB buffer clear error Failed to clear the DB buffer.
Data in the DB buffer could not be
DB buffer read error
read normally.
DB buffer empty error The DB buffer is empty.
Description
10.2 Error Code List
10.2.1 Error codes for the MES interface module
(From the previous page)
Action
• Please consult your local Mitsubishi
representative.
• Replace the CompactFlash card.
—
• Please consult your local Mitsubishi
representative.
• Replace the CompactFlash card.
• Please consult your local Mitsubishi
representative.
• Check the network status.
• Ensure a DB buffering capacity.
• Please consult your local Mitsubishi
representative.
• Check the CompactFlash card.
• If the CompactFlash card is
damaged, replace it.
• Please consult your local Mitsubishi
representative.
• Check the CompactFlash card.
• If the CompactFlash card is
damaged, replace it.
• Do not clear the DB buffer during
resending of DB-buffered data.
• Check the CompactFlash card.
• If the CompactFlash card is
damaged, replace it.
(To the next page)
10
9
10
- 14