Mitsubishi Electric Melsec Q Series User Manual page 150

6
FUNCTIONS
(6) Clearing the DB buffer
6
- 17 6.1 DB Interface Function
6.1.10 DB buffering function
The DB buffer is cleared by the following:
(a) After writing the MES interface function setting to the MES interface module,
performing any of the following operations
• Perform [Update settings]
• Power OFF and then ON
• Reset the programmable controller CPU
Section 7.12.2 Writing the MES interface function settings
(b) Clear request from [MES interface function configuration tool] - [Remote
operation]
Section 7.13.6 Operating the DB buffering
(c) Clear request from [Clear DB buffer request] of the specified tag component
Section 7.6.4 Setting items in DB buffering setting