Mitsubishi Electric Melsec Q Series User Manual page 347

10
TROUBLESHOOTING
(2) Checking the LED status and the switch setting status in [H/W Information] of
No.
H/W LED
1
Information
1
H/W SW
2
Information
3
the diagnostics function.
(a) Operation procedure
1 Click the
H/W Information
2 The [H/W Information] dialog box is displayed.
Operate it referring to the following descriptions.
Figure 10.3 [H/W Information] dialog box
(b) Displayed items
The MES interface module information that is stored in the following buffer
memory areas is displayed.
Display
0000: RUN LED OFF, ERR. LED OFF
8000: RUN LED ON, ERR. LED OFF
C000: RUN LED ON, ERR. LED ON
Switch 1 status (Mode setting)
Switch 2 status (Default operation setting/Battery error detection setting)
Switch 3 status (Response monitoring time setting)
button in [Module's Detailed Information].
Table 10.2 Displayed items
Buffer memory
10.1.3 System monitor
Address
0, 1
2
3
4
10
10.1 Error Codes
9
10
- 6