Mitsubishi Electric MELSEC iQ-R Series Programming Manual page 157

Setting data
■Input/output variable
Variable Description
name
MVP MV input
MVN Output to a module
CASOUT Cascade output
■Public variable (operation constant)
Variable Description
name
NMAX Output Conversion High Limit
NMIN Output Conversion Low Limit
■Public variable (others)
• Simulation processing
Variable Description
name
SIMOUT Simulation Output
*1 Read or write the variables using a program. They are not displayed on "FB Property" of the engineering tool.
■Tag data
For details on tag data that is read or written with this tag access FB, refer to the following.
Page 523 R
*1
9.3 Output Processing-2 with Mode Switching (Without Input Addition) (M+P_OUT2)
Recommended Type
range
0 to 100[%] Input variable
NMIN to NMAX Output variable
0 to 100[%] Output variable
Recommended Initial value
range
-999999 to 999999 100.0
-999999 to 999999 0.0
Recommended Initial value
range
NMIN to NMAX 0.0
Data type
REAL
REAL
REAL
Set by Data type
User REAL
User REAL
Set by Data type
System REAL
9 I/O CONTROL
155
9