Mitsubishi Electric MELSEC iQ-R Series Programming Manual page 147

Setting data
■Input/output variable
Variable Description
name
PVN Input from a module
PVP PV output
■Public variable (operation constant)
Variable Description
name
NMAX Input High Limit
NMIN Input Low Limit
HH High Limit Range Error
H_ High Limit Range Error Reset
L_ Low Limit Range Error Reset
LL Low Limit Range Error
■Public variable (others)
• Simulation processing
Variable Description
name
SIMIN Simulation input
*1 Read or write the variables using a program. They are not displayed on "FB Property" of the engineering tool.
■Tag data
For details on tag data that is read or written with this tag access FB, refer to the following.
Page 490 Tag Data List
*1
Recommended Type
range
NMIN to NMAX Input variable
0 to 100[%] Output variable
Recommended Initial value
range
-999999 to 999999 100.0
-999999 to 999999 0.0
-999999 to 999999 102.0
-999999 to 999999 100.0
-999999 to 999999 0.0
-999999 to 999999 -2.0
Recommended Initial value
range
NMIN to NMAX 0.0
9.1 Analog Input Processing (M+P_IN)
Data type
REAL
REAL
Set by Data type
User REAL
User REAL
User REAL
User REAL
User REAL
User REAL
Set by Data type
User REAL
9 I/O CONTROL
145
9