Chapter 9 I/O Control; Analog Input Processing (M+P_In) - Mitsubishi Electric MELSEC iQ-R Series Programming Manual

9
I/O CONTROL
The following FBs perform I/O processing including analog input/output, pulse integration, and batch counter.
To set initial values of public variables of the tag access FB arranged on a user-defined tag FB in "FB
Property" of the engineering tool, refer to the following.
 GX Works3 Operating Manual
9.1

Analog Input Processing (M+P_IN)

M+P_IN
This FB performs range check, input limiter, engineering value inverse conversion, and digital filter processing.
The input limiter processing can be enabled or disabled on the "Options" window of the engineering tool.
FBD/LD
M+P_IN
PVN PVP
Applicable tag type
PID, 2PID, 2PIDH, PIDP, SPI, IPD, BPI, R, ONF2, ONF3, MONI, SWM, MWM, PVAL
Control mode
MAN

*1 Transition to CASDR is possible.
■Block diagram
(PV Input)
PVN
SIMIN
(Simulation input)
* Indicates bits item.
9 I/O CONTROL
144
9.1 Analog Input Processing (M+P_IN)
AUT

NOR,
OVR
Range
check
SIM
Disable alarm detection
Tag data
SEA (*)
ALM
*1
CAS CMV
 
M+P_IN
Inverse
Input
engineering
limiter
value conversion
CSV

(%)
Digital
filter
PVP