Change Camera Name Location; Change Sector Name Location - Honeywell ACUIX User Manual

Document 800-01023 Rev A
02/08
If the startup screen is set to OFF, an
alternate screen with an X displays upon
power up.

Change Camera Name Location

Select 6 from the Display Options menu to change the position of the camera ID display.
Use the up and down arrow keys (joystick up and down when using VCL protocol) to
position the camera ID. When the camera ID is in the desired location, press Enter (Iris
Open when using VCL protocol).

Change Sector Name Location

Select 7 to change the position of the Sector ID title display. Use the up and down arrow
keys (joystick up and down when using VCL protocol) to position the Sector ID. When the
Sector ID is in the desired location, press Enter (Iris Open when using VCL protocol).
Crosshairs
Select 8 from the Display Options menu to
display crosshairs on the video display. This
is useful when using the Pan Offset feature.
Selecting 8 toggles the crosshairs display
OFF (default) and ON. If turned on, the
crosshairs are displayed when you exit the
setup menus.
Dome Name Settings
Select 9 to access the Dome Name Settings
menu. From this menu, a 24-alphanumeric
name can be programmed for the dome, the
name display can be turned ON or OFF, and
the location of the dome name on the
monitor can be programmed.
ACUIX High Speed Dome User Manual
X
Please wait.......8
CAM 0001 M
DOME NAME SETTINGS
1 Set Dome Name
2 Display Dome Name ....OFF
3 Change Dome Name Location
IRIS CLOSE to Exit
91