Verifying Traffic Marking - Cisco 10000 Series Configuration Manual

Chapter 7 Marking Traffic

Verifying Traffic Marking

The Cisco 10000 series router collects statistical information about the number of packets and bytes
marked.
To verify traffic marking, enter any of the following commands in privileged EXEC configuration mode:
Command
Router# show policy-map
Router# show policy-map policy-map-name
Router# show policy-map interface
Router# show policy-map interface interface
Router# show policy-map interface interface
[input | output]
Router# show policy-map policy-map-name class
class-name
OL-7433-09
Purpose
Displays configuration information for all configured policy
maps.
Displays configuration information for the policy map you
specify.
Displays configuration and statistical information for all of the
input and output policies that are attached to an interface.
For example, statistical information such as the incoming traffic
rate, dropped packet rate, and the number of matched packets and
bytes.
Displays configuration and statistical information for the input
and output policies attached to the interface you specify.
interface is the name of the interface or subinterface whose policy
configuration you want to display.
Displays the configuration of all classes configured for all
inbound or outbound policy maps attached to the specified
interface.
interface is the name of the interface or subinterface whose policy
configuration you want to display.
input indicates to display the statistics for the attached inbound
policy.
output indicates to display the statistics for the attached
outbound policy.
If you do not specify input or output, the router displays
Note
information about all classes that are configured for all
inbound and outbound policies attached to the interface
you specified.
Displays the configuration of the class you specify for the policy
map you specify.
policy-map-name is the name of the policy map that contains the
class configuration you want to display.
class-name is the name of the class whose configuration you want
to display.
Cisco 10000 Series Router Quality of Service Configuration Guide
Verifying Traffic Marking
7-37