Verifying A Subscriber-Based Ip Qos Configuration - Cisco 10000 Series Configuration Manual

Subscriber-Based IP Quality of Service

Verifying a Subscriber-Based IP QoS Configuration

To verify a subscriber-based IP QoS configuration, enter any of the following commands in privileged
EXEC mode:
Command
Router# show class-map
Router# show class-map class-name
Router# show policy-map
Router# show policy-map policy-map-name
Router# show policy-map interface interface
Router# show policy-map interface interface input
Router# show policy-map interface interface
output
Router# show policy-map [interface interface]
[input | output] [class class-name]
Router# show caller
Cisco 10000 Series Router Quality of Service Configuration Guide
18-16
Chapter 18
Purpose
Displays all traffic class information.
Displays the traffic class information for the user-specified traffic
class.
class-name is the name of the traffic class.
Displays all configured service policies and associated traffic
classes.
Displays the service policy information for the specified policy
map.
policy-map-name is the name of the policy map.
Displays configuration information and statistics for the policies
attached to a specific interface.
interface interface is the type and number of the interface.
Displays configuration information and statistics for the input
policy attached to a specific interface.
interface interface is the type and number of the interface.
input indicates the inbound service policy.
Displays configuration information and statistics for the output
policy attached to a specific interface.
interface interface is the type and number of the interface.
output indicates the outbound service policy.
Displays configuration information and statistics for the class
you specify. This class is included in the policy map attached to
the interface you specify.
interface interface is the type and number of the interface.
input indicates the inbound service policy.
output indicates the outbound service policy.
class class-name is the name of the traffic class previously
configured in a class map.
Displays information about callers on the PPP termination
aggregation (PTA) device or on the LNS.
The show caller command does not display information
Note
about callers on the LAC.
Regulating and Shaping Subscriber Traffic
OL-7433-09