Class-Bundle Command - Cisco 10000 Series Configuration Manual

Chapter 19 Configuring Quality of Service for PVC Bundles
bundle Command History
Cisco IOS Release
Release 12.0(26)S
Usage Guidelines for the bundle Command
In the bundle configuration mode you can configure the characteristics and attributes of the bundle and
its members, such as the encapsulation type for all virtual circuits (VCs) in the bundle, the bundle
management parameters, the service type, and so on. Attributes and parameters you configure in bundle
configuration mode are applied to all bundle members.
VCs in a VC bundle are subject to the following configuration inheritance guidelines (listed in order of
next highest precedence):
•
•
•
To display the status of bundles, use the show atm bundle and show atm bundle statistics commands.

class-bundle Command

To configure a virtual circuit (VC) bundle with the bundle-level commands contained in the specified
VC class, use the class-bundle command in bundle configuration mode. To remove the VC class
parameters from a VC bundle, use the no form of the command.
class-bundle vc-class-name
no class-bundle vc-class-name
Syntax Description
vc-class-name
class-bundle Command History
Cisco IOS Release
Release 12.0(26)S
Defaults
No VC class is assigned to the VC bundle.
Usage Guidelines for the class-bundle Command
To use this command, you must first enter the bundle command to create the bundle and enter bundle
configuration mode.
Use this command to assign a previously defined set of parameters (defined in a VC class) to an ATM
VC bundle. Parameters set through bundle-level commands that are contained in a VC class are applied
to the bundle and its VC members.
OL-7433-09
Description
This command was introduced on the PRE1.
VC configuration in bundle-vc mode
Bundle configuration in bundle mode
Subinterface configuration in subinterface mode
Name of the VC class that you are assigning to your VC bundle.
Description
This command was introduced on the PRE1.
Cisco 10000 Series Router Quality of Service Configuration Guide
ATM PVC Selection
19-7