Verifying And Monitoring Dynamic Bandwidth Selection - Cisco 10000 Series Configuration Manual

Chapter 17 Configuring Dynamic Subscriber Services
PPPoA or PPPoE
johndoe

Verifying and Monitoring Dynamic Bandwidth Selection

To verify and monitor dynamic bandwidth selection, enter any of the following commands in privileged
EXEC mode:
Command
Router# show atm pvc
Router# show atm pvc vpi/vci
Router# show atm pvc dbs
Router# show atm vc detailed
Router# show interfaces virtual-access
Router# show running-config
Router# debug atm events
Router# debug atm errors
Router# debug atm status
Router# debug ppp authentication
Router# debug ppp error
OL-7433-09
Password = "cisco"
Service-Type = Frame-User,
Framed-Protocol = PPP,
cisco-avpair = "atm:peak-cell-rate=155000",
cisco-avpair = "atm:sustainable-cell-rate=155000"
Applying Traffic Shaping Parameters Using RADIUS Profiles
Purpose
Displays all ATM PVCs and traffic information.
Displays details about the ATM VCs or PVCs.
Displays information about ATM PVCs that have dynamic
bandwidth selection QoS parameters applied.
Displays detailed information about ATM PVCs.
Displays status, traffic data, and configuration information about
virtual access interfaces (VAIs).
Displays the state of the dynamic bandwidth selection QoS
parameters that have been applied.
If you use the dbs enable or no dbs enable command, the
Note
dynamic bandwidth selection QoS parameters appear in
the output of the show running-config command. If you
use the default dbs enable command, the parameters do
not appear.
Displays the normal set of ATM events when a session comes up
or goes down.
Displays protocol errors and error statistics associated with VCs.
Displays changes in the status of a VC when a session comes up
or goes down, or when the VC configuration is changed.
Displays authentication protocol messages, including Challenge
Authentication Protocol (CHAP) packet exchanges and Password
Authentication Protocol (PAP) exchanges.
Displays protocol errors and error statistics associated with PPP
connection negotiation and operation.
Cisco 10000 Series Router Quality of Service Configuration Guide
17-17