Cisco 10000 Series Configuration Manual page 126

Types of QoS Actions
Table 3-3
Table 3-3
Policy Map
Actions
bandwidth
queue-limit
priority
shape
random-detect
set ip prec/dscp
set qos-group
set atm-clp
set cos
police
set mpls
experimental
1. The interface must be an Ethernet interface that is configured for 802.1Q VLAN.
2. The virtual access interface must be using an 802.1Q VLAN interface.
Cisco 10000 Series Router Quality of Service Configuration Guide
3-6
lists the output policy actions that you can define in a policy map for specific interface types.
Output Policy Map Actions
Normal
Valid
Valid
Valid
Valid
Valid
Valid
Not Applicable Not Applicable
Valid
1
Valid
Valid
Not Applicable Not Available
Chapter 3
Interface Type
Tag (MPLS VPN) Virtual Access
Valid Valid
(Applied to the
VC, not the VAI)
Valid Not Available
Valid Valid
(Applied to the
VC, not the VAI)
Valid Valid
(Applied to the
VC, not the VAI)
Valid Not Available
Not Applicable Valid
Not Applicable
Not Available Not Available
Not Available Valid
Valid Valid
Not Applicable
Configuring QoS Policy Actions and Rules
ATM UBR VCs
Not Applicable
Not Available
Not Applicable
Not Applicable
Not Available
Valid
Not Applicable
Not Available
2
Not Applicable
Valid
Not Applicable
OL-7433-09