Cisco vEdge 100B Quick Start

1
Step
Quick Start Quick Start
Secure the left and right mounting ears
to either side of the router chassis using
the screws in Packet A
Package Contents
Router chassis
USB console cable
Mounting ears, left and right
Mounting-ear screws (Packet A)
Rack-mount screws (Packet B) 2
Step
AC power adapter and connectors
Quick Start document
Lift and position the router in the rack.
Then secure the mounting ears to the
For complete documentation, see
front posts of the rack using the screws
https://sdwan-docs.cisco.com/
in Packet B.
Product_Documentation
Safety Standards
Before installing the routers or connecting it
to a power source, read the planning and
installation instructions for your hardware
platform at: https://sdwan-docs.cisco.com/
Product_Documentation/vEdge_Routers
Failure to observe these safety warnings can
result in personal injury or death.
Rack Mount Wall Mount
1 Step
Insert two wall-mount screws in the wall
where you are mounting the router
(screws not provided). The screws must
align with the wall-mount holes on the
underside of the router chassis.
PWR SYS
DC 12V IN PWR 0 1 2 3 4 CONSOLE RESET GPS
2
Step
Align the wall-mount holes on the router's
underside to the screws in the wall, and
gently slide the chassis, from side to side
or up and down, onto the wall-mount screws.
Wall
See back for more information