Verification Examples For Subscriber-Based Ip Qos Configurations - Cisco 10000 Series Configuration Manual

Chapter 18 Regulating and Shaping Subscriber Traffic

Verification Examples for Subscriber-Based IP QoS Configurations

This section provides the following verification examples:
•
•
Verification Example for the show policy-map interface Command
Example 18-7
Gold policy map, attached to ATM interface 3/0/0, contains three traffic classes: Business,
Non-Business, and class-default.
Example 18-7 Displaying Service Policies Using the show policy-map interface Command
Router# show policy-map interface atm 3/0/0
ATM3/0/0
Service-policy output: Gold
Verification Example for the show caller Command
Example 18-8
Example 18-8 Displaying Caller Information Using the show caller Command
Router# show caller
Line
con0
vty2
Vi1.1
Vi1.2
Vi1.3
Vi1.4
OL-7433-09
Verification Example for the show policy-map interface Command, page 18-17
Verification Example for the show caller Command, page 18-17
shows sample output from the show policy-map interface command. In the example, the
Class-map: Business (match-all)
0 packets, 0 bytes
5 minute offered rate 0 bps, drop rate 0 bps
Match: ip precedence 4
Output queue: 0/128; 0/0 packets/bytes output, 0/0 drops
Bandwidth : 4999 kbps (Weight 3)
Class-map: Non-Business (match-all)
0 packets, 0 bytes
5 minute offered rate 0 bps, drop rate 0 bps
Match: ip precedence 3
Output queue: 0/64; 0/0 packets/bytes output, 0/0 drops
Bandwidth : 2001 kbps (Weight 1)
Class-map: class-default (match-any)
134 packets, 2760 bytes
5 minute offered rate 0 bps, drop rate 0 bps
Match: any
Output queue: 0/4096; 3046242/75866271 packets/bytes output, 0/0 drops
shows sample output from the show caller command.
User
—
—
abc@hello1
abc@hello1
abc@hello1
abc@hello1
5
Service Active Time
TTY 00:14:31
VTY 00:16:45
PPPoE 00:12:10
PPPoE 00:12:10
PPPoE 00:12:10
PPPoE 00:12:10
Cisco 10000 Series Router Quality of Service Configuration Guide
Subscriber-Based IP Quality of Service
Idle Time
00:12:14
00:00:00
—
—
—
—
18-17