Match Commands History - Cisco 10000 Series Configuration Manual

Chapter 2 Classifying Traffic

match Commands History

Cisco IOS Release
Release 12.0(17)SL
Release 12.0(17)SL
Release 12.0(22)S
Release 12.2(15)BX
Release 12.2(16)BX
Release 12.3(7)XI
Release 12.2(28)SB
OL-7433-09
Command
match
match access-group
match-all
match-any
match input-interface
match ip dscp
match ip precedence
match ip rtp
match qos-group
match not
match mpls experimental
match cos
match mpls experimental
topmost
match discard-class
match mpls experimental
imposition
match
Cisco 10000 Series Router Quality of Service Configuration Guide
Traffic Classification Using Class Maps
Description
The match command was introduced on
the PRE1.
This command was enhanced to include
matching on access lists.
This command was enhanced to include
matching on all of the match criteria.
This command was enhanced to include
matching on one match criterion.
This command was enhanced to include
matching on the input interface.
This command was enhanced to include
matching on the IP DSCP value.
This command was enhanced to include
matching on the IP precedence value.
This command was enhanced to include
matching on the IP Real-Time Transport
Protocol (RTP).
This command was enhanced to include
matching on a QoS group.
This command was enhanced to include
matching on criteria that the packet does
not match.
This command was enhanced to include
matching on the MPLS experimental
(EXP) bit value.
This command was introduced on the
PRE2 and enhanced to include matching
on the class of service for inbound policies
only.
This command was enhanced to include
matching on the experimental (EXP) bit
value on the topmost label entry of the
packet.
This command was enhanced to include
matching on the discard-class value.
This command was enhanced to include
matching on the experimental (EXP) bit
value on the imposed label entry of the
packet.
This command was integrated in
Cisco IOS Release 12.2(28)SB.
2-9