Policy-Map Command; Qos Match Statistics Command; Policy Maps Feature; Policy Map Scaling Phase 2 - Cisco 10000 Series Configuration Manual

QoS Features, Commands, and Changes

policy-map Command

Cisco IOS Release: Release 12.0(17)SL
Description: This command was introduced on the PRE1 to configure a QoS policy map.
Cisco IOS Release: Release 12.2(16)BX
Description: This command was introduced on the PRE2.
Cisco IOS Release: Release 12.2(28)SB
Description: This command was integrated in Cisco IOS Release 12.2(28)SB for the PRE2.
Cisco IOS Release: Release 12.2(31)SB2
Description: This command was introduced on the PRE3.
Cisco IOS Release: Release 12.2(33)SB
Description: This command was introduced on the PRE4.

qos match statistics Command

Cisco IOS Release: Release 12.2(31)SB2
Description: This command was introduced on the PRE3 to configure the router to count QoS matches
for each class or for each match statement and class. Per-class counts provide for greater QoS scalability.

Policy Maps Feature

Cisco IOS Release: Release 12.0(17)SL
Description: The QoS policy map feature was introduced on the PRE1 to configure a QoS service
policy.
Cisco IOS Release: Release 12.2(16)BX
Description: This feature was introduced on the PRE2.
Cisco IOS Release: Release 12.2(28)SB
Description: This feature was integrated in Cisco IOS Release 12.2(28)SB for the PRE2.
Cisco IOS Release: Release 12.2(31)SB2
Description: This feature was introduced on the PRE3.

Policy Map Scaling Phase 2

Cisco IOS Release: Release 12.2(33)SB
Description: This feature was introduced on the PRE2, PRE3, and PRE4 to allow up to 8192 policy
maps per system.
Cisco 10000 Series Router Quality of Service Configuration Guide
1-54
Chapter 1 Quality of Service Overview
OL-7433-09