Verifying High And Low Watermarks On An Individual Vc; Verifying Vc Parameter Configurations And Parameter Inheritance - Cisco 10000 Series Configuration Manual
Quality of service configuration guide
Hide thumbs
Also See for 10000 Series:
- Configuration manual (370 pages) ,
- Troubleshooting manual (70 pages) ,
- Installation manual (14 pages)
Table of Contents
Advertisement
Chapter 15
Oversubscribing Physical and Virtual Links
Verifying High and Low Watermarks on an Individual VC
Example 15-16
PVC 1/32.
Example 15-16 Verifying High and Low Watermarks on an Individual VC
Router# show atm pvc 1/32
ATM1/0/0.1: VCD: 1, VPI: 1, VCI: 32
UBR, PeakRate: 149760 (353208 cps)
AAL5-LLC/SNAP, etype:0x0, Flags: 0xC20, VCmode: 0x0, Encapsize: 12
OAM frequency: 0 second(s), OAM retry frequency: 1 second(s)
OAM up retry count: 3, OAM down retry count: 5
OAM Loopback status: OAM Disabled
OAM VC Status: Not Managed
ILMI VC status: Not Managed
InARP frequency: 15 minute(s)
High Watermark: 192, Low Watermark: 128
InPkts: 475877, OutPkts: 475512, InBytes: 33317105, OutBytes: 33287714
InPRoc: 238299, OutPRoc: 98, Broadcasts: 0
InFast: 0, OutFast: 0
InPktDrops: 0, OutPktDrops: 0
Out CLP=1 Pkts: 0
OAM cells received: 0
F5 InEndloop: 0, F5 InSegloop: 0, F5 InAIS: 0, F5 InRDI: 0
F4 InEndloop: 0, F4 InSegloop: 0, F4 InAIS: 0, F4 InRDI: 0
OAM cells sent: 0
F5 OutEndloop: 0, F5 OutSegloop: 0, F5 OutRDI: 0
F4 OutEndloop: 0, F4 OutSegloop: 0, F4 OutRDI: 0
OAM cell drops: 0
Status: UP
PPPOE enabled. Current number of pppoe sessions: 1
Verifying VC Parameter Configurations and Parameter Inheritance
Example 15-17
configurations and from where the parameter values are inherited.
Example 15-17 Verifying VC Parameter Configurations and Parameter Inheritance
Router# show atm class-links 1/32
Displaying vc-class inheritance for ATM1/0/0.1, vc 1/32:
no broadcast -
encapsulation - VC-class configured on vc
no ilmi manage -
inarp 15 -
no oam-pvc manage -
protocol ip inarp no broadcast -
protocol ipx inarp no broadcast -
protocol ppp Virtual-Template1 - VC-class configured on vc
ubr -
no cdvt -
queue depth high watermark 96 low watermark 80 - VC-class configured on vc
OL-7433-09
shows how to use the show atm pvc command to display high and low watermarks for
CDVT: 714.0 Usecs, High Watermark: 192, Low Watermark: 128
uses the show atm class-links command to display virtual circuit (VC) parameter
Verifying Oversubscription and VC Weighting
Cisco 10000 Series Router Quality of Service Configuration Guide
15-43
Advertisement
Chapters
Table of Contents
