Feature History For Frf.12 Fragmentation; Frf.12 Over Multilink Frame Relay - Cisco 10000 Series Configuration Manual

FRF.12 Fragmentation

Feature History for FRF.12 Fragmentation

Cisco IOS Release
Release 12.0(23)SX
Release 12.0(27)S
Release 12.2(27)SBB This feature was introduced on the PRE2 to allow
Release 12.2(31)SB2

FRF.12 over Multilink Frame Relay

To remove and re-attach service policies from the FRF.12 over Multilink Frame Relay configuration
when traffic is running, use
the service policy.
Example 16-5 Remove the Map-Class Before Removing the Service Policy
int mfr2001.1
no frame-relay class mfr
no service-policy out mfr1
int mfr2001.1
service-policy out mfr1
frame-relay class mfr
When traffic is stopped, you can remove and re-attach service policies using
Example
Example 16-6 Removing and Re-attaching the Service Policy
int mfr2001.1
no service-policy out mfr1
int mfr2001.1
service-policy out mfr1
Example 16-7 Remove the Service Policy Before Removing the Map-Class.
int mfr2001.1
no service-policy out mfr1
no frame-relay class mfr
int mfr2001.1
frame-relay class mfr
service-policy out mfr1
Cisco 10000 Series Router Quality of Service Configuration Guide
16-38
Description
The PVC-based FRF.12 Fragmentation feature was
introduced on the router.
This feature was enhanced to allow interface-based
FRF.12 fragmentation.
PVC-based and interface-based FRF.12 fragmentation
only.
This feature was introduced on the PRE3.
Example
16-7.
Chapter 16 Fragmenting and Interleaving Real-Time and Nonreal-Time Packets
16-5. In Example 16-5, you remove the map-class, and then remove
Required PRE
PRE1
PRE1
PRE2
PRE3
Example 16-6 and
OL-7433-09