Related Documentation - Cisco 10000 Series Configuration Manual

Related Documentation

Router# show policy-map pm_hier2_child_0_2
Policy Map pm_hier2_child_0_2
Related Documentation
This section provides hyperlinks to additional Cisco documentation for the features discussed in this
chapter. To display the documentation, click the document title or a section of the document highlighted
in blue. When appropriate, paths to applicable sections are listed below the documentation title.
Feature
Pull and push functionality
Dynamic bandwidth selection
RADIUS
Cisco 10000 Series Router Quality of Service Configuration Guide
17-66
Class cm_0
priority level 1
police percent 5 2 ms 0 ms conform-action transmit exceed-action drop
violate-action drop
queue-limit 77 packets
Class cm_1
Average Rate Traffic Shaping
cir 80%
bandwidth remaining ratio 80
Class class-default
Average Rate Traffic Shaping
cir 50%
bandwidth remaining ratio 20
Chapter 17
Related Documentation
Define Interface Policy-Map AV Pairs AAA feature module,
Release 12.2(28)SB
Cisco IOS Wide-Area Networking Configuration Guide,
Release 12.3
Part 2: Broadband Access > Configuring Broadband Access:
PPP and Routed Bridge Encapsulation > Dynamic Subscriber
Bandwidth Selection
Dynamic Bandwidth Selection, Release 12.2(13)T and 12.2SB
feature module
Cisco IOS Security Configuration Guide, Release 12.3
Part 2: Security Server Protocols > Configuring RADIUS
Configuring Dynamic Subscriber Services
OL-7433-09