Link Fragmentation And Interleaving; Interface Multilink Command; Multilink Group Command - Cisco 10000 Series Configuration Manual

Chapter 1 Quality of Service Overview

Link Fragmentation and Interleaving

Documentation Reference:
Packets"
•
•
•
•
•
•
•
•
•
•
•
•
•

interface multilink Command

Cisco IOS Release: Release 12.0
Description: The interface multilink command was introduced on the PRE1 to create and configure a
MLP bundle.
Cisco IOS Release: Release 12.2(16)BX
Description: This command was introduced on the PRE2 and provides a multilink interface range of 1
to 9999.
Cisco IOS Release: Release 12.2(28)SB
Description: This command was integrated in Cisco IOS Release 12.2(28)SB.
Cisco IOS Release: Release 12.2(31)SB2
Description: This command was introduced on the PRE3 and the valid interface values for MLP over
serial and multi-VC MLP over ATM changed from 1 to 9999 (Release 12.2(28)SB) to from 1 to 9999
and 65,536 to 2,147,483,647.

multilink group Command

Cisco IOS Release: Release 12.0(23)SX
Description: The multilink group command was introduced on the PRE1 to assign a physical link to a
multilink group.
OL-7433-09
Chapter 16, "Fragmenting and Interleaving Real-Time and Nonreal-Time
interface multilink Command, page 1-31
multilink group Command, page 1-31
ppp multilink Command, page 1-32
ppp multilink fragment-delay Command, page 1-32
ppp multilink fragmentation Command, page 1-33
ppp multilink fragment disable Command, page 1-33
ppp multilink group Command, page 1-33
ppp multilink interleave Command, page 1-34
MLP Over ATM-Based LFI Feature, page 1-34
Multi-VC MLP Over ATM-Based LFI Feature, page 1-34
MLP Over Frame Relay-Based LFI Feature, page 1-35
Multi-VC MLP Over ATM-Based LFI Feature, page 1-34
FRF.12 Fragmentation Feature, page 1-35
Cisco 10000 Series Router Quality of Service Configuration Guide
QoS Features, Commands, and Changes
1-31