Verifying The Traffic Class And Traffic Policy Information - Cisco cBR 8 Configuration Manual

Verifying the Traffic Class and Traffic Policy Information

Step 2
Step 3
Step 4
Step 5
Verifying the Traffic Class and Traffic Policy Information
The show commands described in this section are optional and can be entered in any order.
Procedure
Step 1
Cisco cBR Series Converged Broadband Routers Quality of Services Configuration Guide for Cisco IOS XE
Fuji 16.7.x
20
Command or Action
Example:
Router> enable
configure terminal
Example:
Router# configure terminal
interface type number
Example:
Router(config)# interface
TenGigabitEthernet 4/1/0
service-policy {input | output}
policy-map-name
Example:
Router(config-if)# service-policy
input policy1
end
Example:
Router(config-if)# end
Command or Action
enable
Example:
Router> enable
Modular Quality of Service Command-Line Interface QoS
Purpose
• Enter your password if prompted.
Enters global configuration mode.
Configures an interface type and enters interface
configuration mode.
• Enter the interface type and interface number.
Attaches a policy map to an interface.
• Enter either the input or output keyword and
the policy map name.
(Optional) Exits interface configuration mode and
returns to privileged EXEC mode.
Purpose
Enables privileged EXEC mode.
• Enter your password if prompted.