Displaying Simultaneous Policy Map Information For Interfaces - Cisco 10000 Series Configuration Manual

Verification Examples for Traffic Policing

Displaying Simultaneous Policy Map Information for Interfaces

The following example shows sample output from the show pxf statistics qos policy-map interface
command. The output shows policy map information for the specified Gigabit Ethernet
subinterface 6/0/0.2, which is the inherited policy of the sessions that use the subinterface. The output
also shows the policy maps owned by the sessions traversing the subinterface.
Router# show pxf statistics qos policy-map interface gigabitethernet 6/0/0.2
Simultaneous Policymap Info for GigabitEthernet6/0/0.2 -
Input Policy owned by GigabitEthernet6/0/0.2 [VCCI 2524] - 'parent1':
Class
----------------
prec5
class-default
Input Policy owned by Virtual-Access3.4 [VCCI 3241] - ''prec-only":
Class
----------------
prec5
prec3
prec2
class-default
Input Policy owned by Virtual-Access3.3 [VCCI 3240] - 'prec-only':
Class
----------------
prec5
prec3
prec2
class-default
Cisco 10000 Series Router Quality of Service Configuration Guide
14-20
Pkts Bytes
Matched Matched
----------- ------------
1000 66000
0 0
Pkts Bytes
Matched Matched
----------- ------------
500 33000
0 0
0 0
0 0
Pkts Bytes
Matched Matched
----------- ------------
500 33000
0 0
0 0
0 0
Chapter 14
Pkts Pkts
Conformed Exceeded
--------------- -----------
0
0 0
Pkts Pkts
Conformed Exceeded
--------------- -----------
0
0 0
0 0
0 0
Pkts Pkts
Conformed Exceeded
--------------- -----------
0
0 0
0 0
0 0
Simultaneous Policy Maps
Pkts
Violated
-----------
0 0
0
Pkts
Violated
-----------
0 0
0
0
0
Pkts
Violated
-----------
0 0
0
0
0
OL-7433-09